SUPERTOP 1K one-component opaque polyurethane aliphatic transparent resin, UV-resistant, dries by evaporation. Once dried, it forms a transparency with considerable hardness of the film.
Remarkable resistance and resistant to trampling, abrasion and impact. Ideal for the protection of floors and surfaces in wood, cement, microcement, wall coverings, metals. A polyurethane mixture for painting surfaces such as: flooring, wainscoting, expanded polyurethane structures. Ideal for concrete, stone, terracotta and interior and exterior walls.
Achieves high yield and safety after drying, apply 2, 3 layers with a detachment of 12 hours per cycle
Use: use J-40 / P-1 primer on concrete, Primer J-40 / P2 on tiles
Cold water dilution 5%
Yield 10 square meters per kg
Solid content,% 38.5 - 41.5
pH 7.5 - 8.5
Brookfield viscosity at 25ºC, cps <500
Starflex is an aliphatic polyurethane in dispersion with high surface hardness and excellent chemical and mechanical resistance. Starflex 1k does not yellow and is resistant to saponification against alkaline substances.
The main versions of Starflex 1k are:
• Wood varnish
• Enamels for doors and windows
• Paint for parquet
• Paints for some plastics
• Coatings on metals
• As an additive to improve the hardness and strength of other cementitious products or water-based products
• Paint for concrete floors, resin
• Final scratch-resistant protective varnish for decorative paints
• Protective transparent resin for microcemento, spatulated, cementitious, smoothing compounds in general
• Compositions and mixtures with water-based cementitious products
• High-resistance protection for floors and microcement
• Polyurethane-based latex for water-based products etc.
Aqueous aliphatic polyurethane dispersion, polyester base. Free EP and NMP. Starfflex 1k has a content of 3% dipropylene glycol dimethyl ether and 0.7% dimethyl carbonate.
DRYING: 36 hours, Usable 5-7 days (If applied at 20 degrees), 12 days (if applied at a temperature of 10 degrees), in a humid environment a low temperature the total crystallization of the product takes longer. In some temperatures, the wait is between 15 and 28 days maximum waiting time.
