Garage Two paint is an epoxy resin for flooring, epoxy 100%. The solution valid for decoration of industrial floors in concrete, stone, stoneware, terracotta, tiles and wood. The product is constituted by the base A + B (Base 100 A + B Catalyst 25 to 25%) ideal for making industrial floors, but also to restore old tile floors. Its components are combinations of epoxy resins, hardeners and mineral fillers in dispersion. The good flexibility of the hardened product gives the flooring exceptional resistance to stresses caused by the passage of many different vehicles, excellent impact resistance, without causing the formation of cracks. The coating is also water resistant, chemical resistant but vapor permeable. Garage paint has a good resistance to compression and a weak thermal conductivity and acoustics. Is resistant to alkalis, and many other chemicals except chlorine (hypochlorous and cyanides, which tends to discolor). The product is applied on floors clean and healed by potholes and cracks, after basic treatment primer, we recommend two coats of paint Garage. The floor must be dry and free from rising damp (it is always advisable to take the test with leaf politilene. If presents rising damp under the plastic sheet within 12 hours appears frost)
A proposal in the kit: 5 FT - 25 mq.- mq.- 50 100 square meters. If you are looking for an affordable, easy to use and professional, this is the right product.
Garage paint is the right solution. Apply the product is easy, Garage 100% Epoxy paint is resistant to wear, to the transit of cars, trucks and forklifts. Our proposal is very easy for the do-it-yourself installation.
Application: proceed with a thorough cleaning of the floor, filled in cracks and crevices, joints with a leveling mortar, apply a coat of epoxy primer and two coats of paint Garage, the job is done.
Drying time: It is applied with a roller, the surface can be walked usually after 3 days at normal use (better respect the following table, the times vary depending on the room temperature, 10 ° C Foot traffic is within 4 days, a + 20 ° C within 3 days and + 30 ° C within two days. the complete curing requires 12 days / 8 days / 6 days total for the effective use of the system in heavy traffic.
Dilution: The product consists of base A, base and base B catalyst (catalyst 25%), you have to mix the mixture well and aggiundere 5-10% thinner epoxy compound (a + b).
USING THE FLOOR:
12 HOURS Repaintable
48 HOURS USABLE
6/8/12 DAYS USABLE TRAFFIC VEHICLES
Epoxy Flooring 100% pure
YIELD PACKS: KG.1 - MQ.5 - KG.5 - 25 mq.- KG.10 - 50 mq.- kg.20 - 100 sqm. (THE YIELD AND 'UNDERSTANDING FOR TWO HANDS OF PRODUCT)
YIELD: 100 grams per m² per coat
NOTE: the production of the following article is not ready in stock, so the sale is intended for an order only to the commission, there is no right of withdrawal once ordered and produced.