The Painting magnet is a magnet -based paint , which transforms the walls and supports a metallic shield , where you can stick a sheet , blocks of paper , photographs or warnings , post-it with small magnets magnetic . The packaging of painting magnet from 1 kg , weighs about 2 kg is covered with a coat approx. 5 surface . To get a good result apply n.3, also 4 coats of the product to obtain a good attraction to magnets , overlapping the passages at a distance of at least 5 hours between one and the other .
It is recommended to keep stirring the product to prevent the precipitation of the metal particles on the bottom of the package .
Preparation of the base : treat the wall or media with Base Fund .
Next, apply more coats of magnet ( 3, 4 hands ) to obtain a good magnetic surface. Paint is water-based magnet with metal parts that allow the adhesion of magnets.
The wall painted with " Painting Magnet " is ready for use after 24 hours. Painting magnet is dark gray in color , if you want to get the colored surface , you should cover the surface with one or two layers of chalkboard paint by applying very thin layers of paint , as it is likely to greatly reduce the force of attraction of the magnets. So if you prefer to color the layer of magnet with a different color , we recommend increasing the magnetic layers .
The surface of the magnet can be used with magnets , plates , see: www.supermagnete.de
PRODUCT PERFORMANCE : a jar of 1 kg will get 5 m² per coat .
MAGNET SHEET : a good magnet effect is obtained with 3, 4 coats.
COLOR : Painting magnet is dark gray
USE : Mix well before use , the metal particles tend to settle . DILUTION : Dilute the product to 5 % with drinkable water to get the most homogeneous surface , apply with a roller , do not mix with other paints because it threatens to ruin the substance
